Communication Cables · Audio
APAR Tarang Shakti Speaker Cable
High-fidelity speaker cable — bright annealed flexible copper.
Cores2-core
ConductorBright annealed flexible copper
Voltage300/300 V (2000 V test)
Sizes0.5 – 2.5 sq mm
✓ Hi-Fi audio
✓ Flexible
✓ RoHS
Description
OverviewTarang Shakti speaker cable is a two core flexible audio cable with bright annealed electrolytic copper conductors, from 0.5 to 2.5 sq mm on 90 m coils. Fine stranding is what lets it be dressed behind skirting and into a terminal block without the ends splaying.
Amplifier to speaker runs are low voltage and low current, so what actually matters is conductor resistance over the length of the run and a clean, tight termination at both ends. Go up a size for a long run to a ceiling speaker or the far corner of a hall. Rated 300/300 V and tested at 2000 V, for -5°C to +70°C in flexing use, with a minimum bend radius of six times the overall diameter.
Why this wire
Key benefits Flexible Easy to route behind trims.
Low resistance Minimal loss on long runs.
Clear polarity Faster, error-free installation.
Multi-strand copper Handles repeated flexing.
PA and home audio Suits both applications.
RoHS Free of restricted substances.
Characteristics
At a glance| Type | 2-core flexible speaker (audio) cable. |
|---|---|
| Conductor | Multi-wire bright annealed flexible bare electrolytic-grade copper. |
| Voltage rating | 300/300 V; test voltage 2000 V. |
| Temperature rating | -5°C to +70°C (flexing). |
| Minimum bend radius | 6 × overall diameter. |
| Sizes & packing | 2C × 0.5, 0.75, 1.0, 1.5, 2.0 and 2.5 sq mm; 90 m. |
Construction
Cutaway
- 1ConductorStranded, sized and specified for the application
- 2InsulationCompound selected for the product type and temperature rating
- 3Printed identificationGrade, size, voltage and applicable standard
Dimensions & ratings
Technical dataSizes & packing
| Cable type | Size | Packing |
|---|---|---|
| Speaker Cable | 2C × 0.5 sq mm | 90 m |
| Speaker Cable | 2C × 0.75 sq mm | 90 m |
| Speaker Cable | 2C × 1.0 sq mm | 90 m |
| Speaker Cable | 2C × 1.5 sq mm | 90 m |
| Speaker Cable | 2C × 2.0 sq mm | 90 m |
| Speaker Cable | 2C × 2.5 sq mm | 90 m |
Standards & approvals
ComplianceA 2-core flexible copper audio cable rated 300/300 V, with a 2000 V test voltage. There is no ISI/BIS product standard for loudspeaker cable, so this cable is manufactured to APAR's internal specification and tested for conductor resistance and insulation quality under the same in-house regime as our wiring cables.
Conductors are multi-wire bright annealed bare electrolytic-grade copper for low resistance over long runs, rated −5°C to +70°C with a minimum bend radius of 6 × the overall diameter.
IS 694:2010 and the ISI mark do not apply to speaker cable.
300/300 V2000 V testRoHS
Applications
Where it's usedHome-theatre systemsProfessional audio & PAAmplifier-to-speaker runsAuditoriums & venuesIn-wall audio wiringStudios
Not sure which size you need?
Open calculator →Use the APAR Wire-Size Calculator to size a circuit in seconds.
Documents
DownloadsFAQs
Good to knowHigh-purity, flexible copper with adequate cross-section keeps resistance low, so more of the amplifier's signal reaches the speakers with minimal loss and distortion.
Thicker cable (higher sq mm) is better for long runs and higher power; 0.5–1.5 sq mm suits most home setups, with 2.0–2.5 sq mm for long or high-power runs.
300/300 V with a 2000 V test voltage, rated for -5°C to +70°C in flexing use.
Sizing or selecting a cable? Browse our guides & charts →
Request information
Pricing or datasheetRequest information
Tell us your requirement — our team will get back to you.
Quote request
Enquiry about: APAR Tarang Shakti Speaker Cable · Communications Cables
✓ We reply within 1 business day✓ No spam — your details are used only for this enquiry
Get APAR Tarang Shakti Speaker Cable
Enquire for pricing, request the datasheet, or apply to become an authorised dealer.
