Skip to main content
123
  1. 1
    ConductorStranded, sized and specified for the application
  2. 2
    InsulationCompound selected for the product type and temperature rating
  3. 3
    Printed identificationGrade, size, voltage and applicable standard
Cable Solutions · Fibre Optic Cables

Single-mode and multi-mode fibre

Single-mode and multi-mode optical fibre for every distance class.
Fibre count1F – 1152F across the range
Fibre typesSingle-mode and multi-mode
Bend insensitiveG.657 available for last mile
Operating temperature−40°C to +70°C
Request a quoteDownload datasheet
Share
✓ 1F – 1152F
✓ Single-mode
✓ Multi-mode
✓ G.657

Pricing, samples or a datasheet?

Request a quote Download datasheet ↓

Description

Overview

Single-mode fibres have a very thin core, with a diameter of 8-10 microns for the optical signal to move through. The light signal follows the principal of total internal reflection, and passes through the fibre core throughout the fibre length at the speed of light. Due to lowered attenuation, the signal can travel faster and farther. A single-mode fibre cable is suited to long distace networks, such as from one city to another, one state to another, or even one continent to another. Multi-mode optical fibres are about 10 times bigger than single-mode fibres. They allow light beams to travel in a variety of paths (hence the name multiple modes). Multi-mode fibre optic cables have a large core diameter to allow multiple modes of light. Due to multiple modes of light travelling within the fibre, dispersion and attenuation is higher than in single mode fibres. A multi-mode fibre cable is

Single-mode fibre suits long-distance, high-bandwidth links; multi-mode is cost-effective over shorter campus and in-building runs. Both are available across APAR's cable constructions.

Why this wire

Key benefits
Every construction Both fibre types across duct, armoured, aerial, microduct and FTTx.
G.657 bend insensitive For drop cables and tight indoor routing.
Up to 1152F Ribbon designs reach the highest counts.
200,000 km capacity Annual installed manufacturing capacity.

Characteristics

At a glance
ApplicationSingle-mode fibres are meant for long distance data transmission networks (100 kms and above) due to their enormous bandwidth and low losses. They are generally used by telcos, CATV companies, railways, power grids and oil and gas companies. Multi-mode fibres are typically meant for short distances (maximum 2 kms) and are generally used in data and audio/video applications in local area networks.
CharacteristicsLarge fibre counts with small cable diameter. These cables are highly adaptable to mass splicing and are suitable for installation in pipelines.
Applicable standardsIEC 60793, IEC 60794, Telcordia GR -20, TIA/EIA 598
Product rangeAPAR offers single-mode optical fibre cables using G652D/G655 & G 657 fibres from 2F to 512 F, in armoured, unarmoured and aerial appliications. Multi-mode optical fibre cables using OM1/OM2/OM3 & OM4 fibres from 2F to 24F, in armoured, unarmoured and aerial applications.
AdvantagesSingle-mode fibre optic transmissions are faster than multi mode over long distances, because fewer switches or routers are needed mid span. They have virtually unlimited bandwidth, and are capable of transmitting data at up to 40 GB over hundreds of kilometers, with little integrity loss. Multi-mode cables are less expensive to install, operate, and maintain. Multi-mode cables have high speed and high bandwidth over short distances. They allow several mode optical signals to be transmitted at once.

Construction

Cutaway
123
  1. 1
    ConductorStranded, sized and specified for the application
  2. 2
    InsulationCompound selected for the product type and temperature rating
  3. 3
    Printed identificationGrade, size, voltage and applicable standard

Standards & approvals

Compliance

Manufactured and tested to IEC 60793, IEC 60794, EIA/TIA, ITU-T, Telcordia GR-20. Test certificates and detailed technical particulars are issued on request — please confirm the specification your project is tendered against.

IEC 60793IEC 60794EIA/TIAITU-TTelcordia GR-20

Applications

Where it's used
DataAudio/video applications in local area networks
Not sure which size you need?

Use the APAR Wire-Size Calculator to size a circuit in seconds.

Open calculator →

FAQs

Good to know

Where are these cables typically used?+

Single-mode fibres are meant for long distance data transmission networks (100 kms and above) due to their enormous bandwidth and low losses.

How do I get pricing or more details?+

Use the enquiry form on this page or the Request a Quote option, and APAR's team will respond with availability and details for your requirement.

Sizing or selecting a cable? Browse our guides & charts →

Request information

Get a quote

Request a quote

Tell us your requirement — our team will get back to you.

Enquiry about: Single-mode and multi-mode fibre · Fibre Optic Cables

Your details are used only to respond to this enquiry. We never share them with third parties.

✓ We reply within 1 business day✓ No spam — your details are used only for this enquiry
Get Single-mode and multi-mode fibre

Enquire for pricing, request the datasheet, or find your nearest authorised dealer.

Enquire nowRequest Dealer Quote