Cable Solutions · Fibre Optic Cables
ADSS and fig 8 aerial cables
ADSS Cables are lightweight with a small diameter, which enables them to be installed aerially in short, mediu
BrandAerioFib
Fibre count1F – 432F
TypesADSS and metallic Fig 8
Operating temperature−40°C to +70°C
✓ 1F – 432F
✓ ADSS
✓ Fig 8
✓ EN 187000
Description
OverviewThe construction consists of a uni/loose tube cable with an optical fibre placed inside buffer tubes which are then stranded around a fibre-reinforced plastic (FRP)-strength member at the centre. In addition to fibres, the tubes contain gel to block water and prevent it from entering the gaps in the cable core. A water-swellable tape is also provided around the cable core. Strong, evenly distributed aramid/glass yarns provide the tensile strength required in aerial self-supporting applications. To give mechanical and environmental protection, a thermoplastic overall sheath is also provided with the cable. This is a metal-free cable specially designed for laying below high-tension power lines ranging from 11 kV to 660 kV. For above 33 kV power lines, a special anti-track material is used, to prevent dry band arching on ADSS cables and to save cables from damage. For Figure 8 aerial self-s
Why this wire
Key benefits All-dielectric self-supporting No metallic messenger needed — installs alongside power lines.
Fig 8 option Metallic messenger for longer, more robust spans.
Anti-tracking material For routes along high-tension lines.
Light, medium, high loading Rated for all three loading conditions.
1F to 432F Unitube, loose tube and ribbon configurations.
Characteristics
At a glance| Application | This ADSS Cable is designed for outside plant (OSP) aerial self-supported applications, high-tension power line distribution and local and campus network loop architectures. The cable is suitable for aerial-to-duct/underground transitions. Figure 8 cables are suitable for aerial applications. |
|---|---|
| Characteristics | This cable can be designed to specific requirements of length, wind speed and other loading conditions. All dielectric designed cables are completely immune to electromagnetic fields. |
| Applicable standards | IEC 60793, IEC 60794, Telcordia GR -20, TIA/EIA 598, IEEE 1222 |
| Product range | APAR offers ADSS Cables from 2F to 288F or more as per customer specifications, with various types of fibres like G.652 D, G657A1 & A2 ,G.655, G.656. We also offer multimode fibres with a span of 100 to 800 metres, requiring wind, ice load and sag for 11 kV to 660 kV power lines. APAR offers a variety of Figure 8 aerial cables from 2F to 288F, with single and multimode fibres, with uni/loose tube unarmoured and armoured cables. |
| Advantages | These cables are flexible, lightweight, easy to handle and install. They are tensile, crush resistant and UV protected. The physical parameters of these cables are tightly controlled. All-dielectric self-supporting (ADSS) fibre cables provide advantages over strand and lash fibre networks for electric utility applications in many cases. Some of the advantages of ADSS cables include: No metallic components. They can be installed in supply space with no grounding required Little to no ‘make ready’ cost Lower hardware costs Speed and ease of installation Minimal long term maintenance Longer expected design life In most scenarios, these advantages lead to lower total cost for the electric utility. |
Construction
Cutaway123
- 1ConductorStranded, sized and specified for the application
- 2InsulationCompound selected for the product type and temperature rating
- 3Printed identificationGrade, size, voltage and applicable standard
Standards & approvals
ComplianceManufactured and tested to IEC 60793, IEC 60794, EIA/TIA, ITU-T, Telcordia GR-20, EN 187000. Test certificates and detailed technical particulars are issued on request — please confirm the specification your project is tendered against.
IEC 60793IEC 60794EIA/TIAITU-TTelcordia GR-20EN 187000
Applications
Where it's usedHigh-tension power line distributionLocalCampus network loop architectures
Not sure which size you need?
Open calculator →Use the APAR Wire-Size Calculator to size a circuit in seconds.
Documents
DownloadsFAQs
Good to knowWhat are the main applications?+
Typical applications include high-tension power line distribution, local, campus network loop architectures. Contact our technical team to confirm suitability for your specification.
Where are these cables typically used?+
This ADSS Cable is designed for outside plant (OSP) aerial self-supported applications, high-tension power line distribution and local and campus network loop architectures.
How do I get pricing or more details?+
Use the enquiry form on this page or the Request a Quote option, and APAR's team will respond with availability and details for your requirement.
Sizing or selecting a cable? Browse our guides & charts →
Request information
Get a quoteRequest a quote
Tell us your requirement — our team will get back to you.
Enquiry about: ADSS and fig 8 aerial cables · Fibre Optic Cables
✓ We reply within 1 business day✓ No spam — your details are used only for this enquiry
Get ADSS and fig 8 aerial cables
Enquire for pricing, request the datasheet, or find your nearest authorised dealer.
